Clarion VRX878RVD - Manual (Page 72)

76
VRX878RVD
English
INSTAL
LATIO
N
MAN
UAL
5. INSTALLING THE MAIN UNIT
Universal Mount
1. Place the universal mounting bracket into the
instrument panel, use a screwdriver to bend
each stopper of the universal mounting
bracket inward, then secure the stopper as
shown in Figure 6.
2. Wire as shown in Section 8 (see page 79).
3. Insert the main unit into the universal
mounting bracket until it locks.
4. Mount the outer escutcheon so that all the
hooks are locked.
Note:
*1: Some car models require special mounting kits
for proper installation. Consult your Clarion
dealer for details.
*2: Fasten the front stopper securely to prevent the
main unit from coming loose.
Figure 6
• Console opening dimensions
Hole
Main unit
182 mm
53 mm
Screwdriver
Stoppers
Hole
Rear fastening hole (of vehicle)
Instrument panel
Rubber cap
Universal mounting bracket
Stoppers
2-Spring
Outer escutcheon
Note:
Special Screw
Set the outer escutch-
eon so that its metallic
part on the back side
fits the upper edge of
the main unit.