CREATIVE AWE64 - Manual (Page 37)

C-2 Changing Audio Card Settings
4. In the Device Manager tab, double-click Sound, Video And
Game Controllers.
5. Select Creative AWE64 16-bit Audio (SB16-compatible) and
click the Properties button.
6. In the properties sheet, click the Settings tab.
7. To enable the Creative 3D Stereo Enhancement effect, select
the Enable Creative 3D Stereo Enhancement check box in the
Settings tabbed page.
To disable the effect, click to clear the check box.
8. Click the OK button.
In MS-DOS/Windows 3.1x
To enable or disable the effect in MS-DOS:
1. At the MS-DOS prompt, change to the directory containing
your audio card’s software; for example C:\SB16.
2. To enable the effect, type CT3DSE ON.
To disable the effect, type CT3DSE OFF.
Enabling/Disabling Full Duplex Operation
Full duplex is a feature in your audio card that allows you to record and
play back audio data simultaneously. It is useful for audio
conferencing and telephone-like applications. When it is enabled, you
can play back and record at the same time. However, there are some
limitations:
❑ You can start only one session of simultaneous playback and
recording.
❑ You must use the same sampling rate for both playback and
recording.
For example, since Creative WaveSynth/WG does a Wave
playback at 22 kHz, you can record at only 22 kHz.
❑ You cannot play other Wave files when using Creative
WaveSynth/WG.
❑ You cannot add reverb effect when you play back Wave files.