To set up a dial-up script – CREATIVE AWE64 User Manual
Page 55
5
To Set Up a Dial-Up Script
Ignore this section if your Service Provider does not require a
dial-up script. If using Dial-Up Scripting, do not check the “Bring
Up Terminal Window” option.
To set up a dial-up script:
1.
If you have not installed the Dial-Up Scripting Tool, follow the
steps below to install the tool:
a.
Insert the Windows 95 CD-ROM into your CD-ROM drive.
b.
Using the Control Panel, select Add/Remove Programs.
c.
Select Windows Setup from the Title Bar.
d.
Select Have Disk, Browse and locate the RNAPLUS.INF file
in \ADMIN\APPTOOLS\DSCRIPT\.
e.
Click OK and follow the instructions on screen to complete the
installation.
2.
You will need a dial-up script (filename.SCP) in the directory
\Program Files\Accessories\ of your system. This is usually
provided by your Internet Service Provider.
If you do not have a dial-up script, check with your Internet Service
Provider whether you need one and where can you download one
to your system.
3.
Once the Dial-Up Scripting Tool is installed:
a.
Click Start on the taskbar.
b.
Select Programs, followed by Accessories to run the Dial-Up
Scripting Tool.
c.
In the Connections section, select the name of your Internet
Service Provider.
d.
Click Browse and double-click on the script file name you
created in step 2.
e.
Click Apply and click Close.