Introduction, Features – Connect Tech CANpro/104-Plus User Manual
Page 4
CANpro/104-Plus Opto User Manual
CTIM-00052 Revision 0.00 4/23/2009
www.connecttech.com
4
800-426-8979 | 519-836-1291
Introduction
CANpro/104-Plus Opto combines the power of two independent NXP SJA1000 CAN controllers with 3kV
optical isolation to provide maximum protection for industrial control applications exposed to harsh
conditions. Based on the PCI bus and a PCI-104 form factor, CANpro/104-Plus Opto frees up valuable I/O
space for greater flexibility in your embedded system.
Features
●
Two independent, industry standard NXP SJA1000 CAN controllers (2.0B compliant)
●
PCI-104 2.2 compliant
●
16MHz SJA1000 input clock
●
32MHz local bus clock
●
Fail-safe power-up/power-down using on-board impendence transceivers to maximize nodes on the bus
and ensure glitch-free operation.
●
Supports up to 1.0 Mbps operation and over 120 nodes on the bus
●
3kV optical isolation for each port from the host system
●
Output slew rate limiting for lower radiated emissions
●
Memory mapped addressing to save valuable I/O space (no jumpers required)
●
Decoded address range is configurable for BasicCAN and PeliCAN modes
●
Two ten pin right angled headers as standard I/O connectors (DB-9 option available)
●
GPIO: 8-bit 3.3V I/O header
●
Operating temperature range of -40°C to 85°C
●
+5V DC 500mA (max.) power output
RoHS compliant