Connect Tech CANpro/104-Plus - Manual (Page 8)

CANpro/104-Plus Opto User Manual
CTIM-00052 Revision 0.00 4/23/2009 www.connecttech.com 8
800-426-8979 | 519-836-1291
PCI Interrupt, Clock and ID Selection
The following PCI signals, (INTA#, INTB# INTC# INTD#), (CLK0, CLK1,
CLK2, CLK3), (IDSEL0, IDSEL1, IDSEL2, IDSEL3), are selected by using the
Rotary Switch on the CANpro/104-Plus Opto board (RSW1). Selections need to
match the stack location of the CANpro/104-Plus Opto in your PC/104-Plus
stack. See
Table 1 below for more details.
Rotary Switch Location
Table 1: Rotary Selection
Stack Location Rotary Setting PCI INT# PCI CLK PCI IDSEL
0 or 4 INTA# CLK0 IDSEL0
1 or 5 INTB# CLK1 IDSEL1
2 or 6 INTC# CLK2 IDSEL2
3 or 7 INTD# CLK3 IDSEL3
Please visit http://www.pc104.org/pc104_plus_specs.php to request the full PC/104-Plus specification for
more details on signals.