Compaq DESKTOP CONNECTOR FOR ACMS AAPG9DKTE - Manual (Page 19)

In addition, installing TP Desktop Connector software requires a certain
amount of free storage space. Table 1–1 summarizes the storage requirements
for TP Desktop Connector during and after installation.
Table 1–1 TP Desktop Connector Disk Space Requirements
Blocks During
Installation Blocks After
Installation
TP Desktop Connector Gateway for ACMS software 23,304 6,500
OpenVMS client files 34,383 3,300
To determine the number of free disk blocks on the current system disk, enter
the following command at the DCL prompt:
$ SHOW DEVICE SYS$SYSDEVICE
In the output column under the heading Free Blocks is the number of 512-byte
blocks available on the device.
1.3 Installation Procedure Requirements
Both the gateway and client installations from the Software Products Library
CD use the VMSINSTAL command. Section 2.1 describes the gateway and
server-side instructions. Section 2.2 describes the client installation process.
Before Installing TP Desktop Connector from the Software Products Library CD 1–3