Compaq DESKTOP CONNECTOR FOR ACMS AAPG9DKTE - Manual (Page 71)

Please mount the first volume of the set on DKA200:.
* Are you ready? YES
%MOUNT-I-MOUNTED, ACMSDI mounted on DKA200:
The following products will be processed:
ACMSDI V3.1A
Beginning installation of ACMSDI V3.1A at 13:14
%VMSINSTAL-I-RESTORE, Restoring product save set A...
If you enter the wrong device name when you invoke VMSINSTAL and
need to restart the installation, answer NO in response to the
Are you
ready? question. See Section 8.3.6 for instructions on mounting the CD.
To abort the installation for other reasons, press Ctrl/Y .
4. Release Notes
If you specified OPTIONS N when you invoked VMSINSTAL, you see
several options for reviewing the Release Notes. The following options are
displayed:
Release Notes included with this kit are always copied to SYS$HELP.
Additional Release Notes Options:
1. Display release notes
2. Print release notes
3. Both 1 and 2
4. None of the above
* Select option [2]: 1
• Option 1
If you select option 1, VMSINSTAL displays the Release Notes
immediately on the console terminal. You can terminate the display
at any time by pressing
Ctrl/C . Because the Release Notes are several
pages long, it is recommended that you choose option 2 to print the
Release Notes rather than reviewing them on line.
• Option 2
If you select option 2, VMSINSTAL prompts for the name of the print
queue to use:
* Queue name [SYS$PRINT]:
Enter the name of an ANSI print queue on your system, or press Return
to send the file to the default queue shown within the square brackets.
• Option 3
Installing TP Desktop Connector Gateway for ACMS Software 9–5