Compaq DESKTOP CONNECTOR FOR ACMS AAPG9DKTE - Manual (Page 56)

3. You can copy the client services library to /usr/lib/libacmsdi.a , so
that you can refer to it in your link command as ’-lacmsdi’ . You need
superuser privileges to copy into the /usr/lib directory.
Copy the TP Desktop Connector client library to the system directory:
# cp libacmsdi.a /usr/lib/libacmsdi.a
.
.
.
You can leave the TP Desktop Connector library in the client services
directory. If you do, use the full path to the library in your link command,
instead of using the
’-lacmsdi’ option.
4. Update the copied library file:
# ar qs /usr/lib/libacmsdi.a
5. Exit superuser mode:
# Ctrl/D
>
See Section 7.3.1 for instructions on installing sample files.
7.3.1 Installing the Motif Sample Client on Tru64 UNIX Platforms
To install the Motif sample files on the Tru64 UNIX system, perform the
following steps:
1. Create a directory on the desktop to contain the sample files and change to
that directory:
> mkdir avertz
> cd avertz
2. Copy the sample tar file from the TPware Product Suite CD:
> cp cd/dunix/samples/du_avertz.tar .
If you install the client files from the Software Products Library CD, change
directory to the location in which you expanded the archive file that you copied
from the OpenVMS system (see Section 3.2.2.2).
The du_avertz.tar file contains the sample files. Extract the sample files:
> tar xvf du_avertz.tar
.
.
.
The list of files printed should match the list in Table A–6.
7–10 Installing the TP Desktop Connector Client Services on Non-Windows Systems