Contec CheckMate RT-U49+ - Manual (Page 19)

1. 1. Press [DEVICE], then [MUTE] together until buttons Press [DEVICE], then [MUTE] together until buttons
light up (approx. 2 - 3 seconds) light up (approx. 2 - 3 seconds)
2. 2. Press [CABLE]. [CABLE] will light up Press [CABLE]. [CABLE] will light up
3. 3. Press [VOL ^ Press [VOL ^ ] ], then [ CABLE ]
4. 4. The [CABLE] button will blink and go out The [CABLE] button will blink and go out
To return volume / mute contol back to the converter
Programming Volume Control Programming Volume Control
in the remote's CABLE mode...
___ ___ ___