Contec CheckMate RT-U49+ - Manual (Page 4)

Only Only “ “ code-entry” code-entry”
programming will work programming will work
in programming your in programming your
cable set-top device… cable set-top device…
Programming Programming
Cable Set-Top Device Cable Set-Top Device
The next page will show you a list of codes for programming your cable set-top device The next page will show you a list of codes for programming your cable set-top device
1. Turn on cable set-top device 1. Turn on cable set-top device
2. Press [DEVICE], then [MUTE] 2. Press [DEVICE], then [MUTE] together together until buttons until buttons
light up (approx. 2 - 3 seconds) light up (approx. 2 - 3 seconds)
3. Press [CABLE]. [CABLE] button will light up 3. Press [CABLE]. [CABLE] button will light up
4. Enter 3-digit setup 4. Enter 3-digit setup code code for cable set-top model for cable set-top model
5. Press [CABLE] to lock in code. [CABLE] button will 5. Press [CABLE] to lock in code. [CABLE] button will
blink and go out blink and go out
When programming cable set-top devices other than
Motorola DCT 2000 series and CFT2200