Contec CheckMate RT-U49+ - Manual (Page 21)

Programming SmartKeys Programming SmartKeys ™ ™
1. Press [DEVICE], then [CABLE] to select cable mode 1. Press [DEVICE], then [CABLE] to select cable mode
2. Press [CABLE], then [SELECT] 2. Press [CABLE], then [SELECT] together together until [CABLE] until [CABLE]
button lights up (approx. 2 - 3 seconds) button lights up (approx. 2 - 3 seconds)
3. 3. In this order In this order press [TV], [DEVICE], [TV], [0], [3] (may be press [TV], [DEVICE], [TV], [0], [3] (may be
2 or 4) 2 or 4)
4. Press [CH ^ 4. Press [CH ^ ] to store the setting ] to store the setting
5. The [CABLE] button will blink and go out 5. The [CABLE] button will blink and go out
To program [CABLE] Smartkey ™ to turn on the cable set-top
device and TV, then tune the TV to output CH 3