Contec CheckMate RT-U49+ - Manual (Page 9)

Programming Video (VCR / DVD) Programming Video (VCR / DVD)
1. Turn on VCR or DVD 1. Turn on VCR or DVD
2. Press [DEVICE], then [MUTE] 2. Press [DEVICE], then [MUTE] together together until buttons light up until buttons light up
(approx. 2 - 3 seconds) (approx. 2 - 3 seconds)
3. Press [VIDEO]. [VIDEO] button will light up 3. Press [VIDEO]. [VIDEO] button will light up
4. a. Press & hold [CH ^ 4. a. Press & hold [CH ^ ] ] until device turns off until device turns off
Or Or
b. Press [CH ^] one press at a time until device turns off b. Press [CH ^] one press at a time until device turns off
Or Or
c. Enter 3-digit setup codes until device turns off c. Enter 3-digit setup codes until device turns off
5. Press [MUTE]… 5. Press [MUTE]…
a. If VCR / DVD turns on, press [VIDEO] to lock in code. a. If VCR / DVD turns on, press [VIDEO] to lock in code.
[VIDEO] button will blink and go out [VIDEO] button will blink and go out
Or Or
b. If VCR / DVD doesn’t turn on, repeat steps 4 and 5 until b. If VCR / DVD doesn’t turn on, repeat steps 4 and 5 until
VCR / DVD turns on and off. Can also press [CH v VCR / DVD turns on and off. Can also press [CH v ] ] one one
press at a time until VCR / DVD turns on and off press at a time until VCR / DVD turns on and off