Contec CheckMate RT-U49+ - Manual (Page 6)

The next page will show you a list of codes for programming your TV The next page will show you a list of codes for programming your TV
1. Turn on TV 1. Turn on TV
2. Press [DEVICE], then [MUTE] 2. Press [DEVICE], then [MUTE] together together until buttons light up until buttons light up
(approx. 2 - 3 seconds) (approx. 2 - 3 seconds)
3. Press [TV]. [TV] button will light up 3. Press [TV]. [TV] button will light up
4. a. Press 4. a. Press & hold & hold [CH ^ [CH ^ ] ] until device turns off until device turns off
Or Or
b. Press [CH ^] b. Press [CH ^] one press one press at a time at a time until device turns off until device turns off
Or Or
c. Enter 3-digit setup codes until device turns off c. Enter 3-digit setup codes until device turns off
5. Press [MUTE]… 5. Press [MUTE]…
a. If TV turns on, press [TV] to lock in code. [TV] button will a. If TV turns on, press [TV] to lock in code. [TV] button will
blink and go out blink and go out
Or Or
b. If TV doesn’t turn on, repeat steps 4 and 5 until TV turns on b. If TV doesn’t turn on, repeat steps 4 and 5 until TV turns on
and off. Can also press [CH v and off. Can also press [CH v ] ] one one press at a time until TV press at a time until TV
turns on and off turns on and off
Programming TV Programming TV