Vertical Communications MP5000 - Manual (Page 13)

CONVERSip EP300 User
May ‘04 Comdial 13
1.3 Adjusting the Volume
Adjusting the volume on the EP300-24 instrument affects the
loudness of the speaker, handset, and headset (if equipped). Refer to
Figure 1-1 for the location of the volume control.
To adjust the volume during a call, perform the following steps.
1. Press the volume up or volume down button on the EP300.
The EP300 adjusts the volume incrementally each tome you
press the button.
2. The volume setting remains in affect for the current call only.
If you want to adjust the volume for all calls, you can adjust your
default settings by using the LCD menu structure. To do so, select
Menu, 1 Hardware Settings>1 Handset Volume and set the volume
you want to use on all calls. The new setting remains in place until
you make subsequent adjustments.
1.4 Using the LCD Menu
The EP300 menu allows you to view or modify the configuration set-
tings of your EP300, and to view the call activity log. Some items are
password protected and should only be changed by the installer or
administrator, since doing so could adversely affect the operation of
your phone.
Normal display on your EP300 LCD consists of the date and time on
the first line, and the soft key labels on the second line.
Tue Apr 20 4:22
MENU STA