Vertical Communications MP5000 - Manual (Page 22)

Making Calls
22 Comdial May ‘04
2.3 Redialing a Previously Dialed
Number
The system remembers the last ten numbers you dialed. If you want
to redial any of those numbers, press the REDIAL button on the
EP300.
By pressing the PREV or NEXT soft keys, you can scroll through the
list of previously called numbers, and select the number from the list.
To redial a previously dialed number, perform the following steps.
1. Lift the handset, or press the SPEAKER button. The system
plays the dial tone.
2. Press the Redial button.
3. Observe the LCD display and select the number to dial by
pressing the PREV soft key.
4. When you have made your selection, press the DIAL soft key.
5. The system rings the called extension (if idle), or plays a busy
signal (if busy). If you dialed an invalid number, the system
plays an audible tone indicating that the number you dialed is
invalid.
6. When the called party answers, begin your conversation. Note
that the system changes the soft key options on your EP300’s
LCD once the call connects.
9415545000
PREV DIAL CLEAR