Vertical Communications MP5000 - Manual (Page 29)

CONVERSip EP300 User
May ‘04 Comdial 33
If you transfer the call without first announcing it, you have made an
un-screened or blind transfer.
To transfer an un-screened call to another system endpoint, perform
the following steps.
1. While on a call, press the pre-programmed TRANS soft key or
TRANS/CONF button on your EP300.
The system automatically places the outside party on hold.
2. Enter the number for the intended destination and press the
Dial button on your EP300.
3. Press the TRANS soft key to transfer the call.
If the other party answers, the system connects the transferred
call to that party. If the other party does not answer, the call
follows the no-answer forward condition of the target destina-
tion.
4.5 Establishing a Multi-Party
Conference
You may wish to create a conference call with other parties.
4.5.1 MEET-ME CONFERENCES
A Meet-Me conference is established when all participants dial a
code to enter the conference room. If you want to use Meet-Me con-
ferences, your system must use Comdial's voice mail system (see
your System Administrator for more details).
To set up a Meet-Me conference, perform the following steps.
1. Dial the conference room mailbox number (default 5801, 5802,
5803, 5804, 5805).
The voice mail transfers the caller into the conference room.
2. If you are the first member to join the conference, the EP300
plays tone-on-hold beeps.