Vertical Communications MP5000 - Manual (Page 27)

CONVERSip EP300 User
May ‘04 Comdial 31
4. PROCESSING CALLS
4.1 Muting the Microphone
You have the option of muting the microphone on the EP300-24 so
that the distant party cannot hear any audio from your microphone.
This setting affects the transmitter of the handset, headset, and the
built-in microphone of the EP300. This condition remains in affect
until the call is disconnected, or you press the button again,
whichever occurs first.
To mute the microphone, press the MUTE button. To restore to
normal operation, press the MUTE button again.
4.2 Using Call Hold
You can place a call on hold and retrieve it later. To place a call on
hold, perform the following steps.
1. While on an active call, press the HOLD button on your
EP300. The lamp associated with this button blinks.
2. The system plays music on hold (if equipped) to the outside
party.
3. The lamp extinguishes if the outside party hangs up before you
retrieve the call. The LCD shows the number of calls on hold
instead of the station number.
CALLS ON HOLD: 2
MENU