Vertical Communications MP5000 - Manual (Page 23)

CONVERSip EP300 User
May ‘04 Comdial 23
7. When the call is complete, press the END soft key, hang up the
handset, or press the SPEAKER button if using the speaker-
phone option.
2.4 Making a Call Using a Speed Dial
Button
To use a speed dial button to make a call, perform the following steps.
1. Lift the handset, or press the SPEAKER button. The system
plays the dial tone.
2. Press a pre-programmed speed dial button.
3. The system rings the called extension (if idle), or plays a busy
signal (if busy). If you dialed an invalid number, the system
plays an audible tone indicating that the number you dialed is
invalid.
4. When the called party answers, begin your conversation.
5. When the call is complete, press the END soft key, hang up the
handset, or press the SPEAKER button if using the speaker-
phone option.
2.5 Calling the Attendant
During the initial system configuration, the system installer assigns
the extension number for the attendant. To call the attendant, either
dial their unique extension number, or you can simply press 0.
95545000
HOLD TRANS END