Vertical Communications EP100 - Manual (Page 71)

CONVERSip EP100 User
Sept ‘04
Comdial 73
4. Press programmable button or dial pad button (0–9) to choose
storage location (remember, to access second level storage at a
programmable button, press SHIFT first).
5. Choose your speed dial route
from the following list:
• Press line button to select
outside line,
• Dial 00 to select prime line or
last line used,
• Dial 01 to 16 to select line
group,
• Press INTERCOM button or dial 8 to select intercom .
Note: You may need a pause between numbers to compensate
for differences in response time between your system and the
host system (ask your attendant about this). To store a pause,
press HOLD, then continue dialing. If your system is behind a
host system that needs a hook flash to access a feature, press
TAP to store a hook flash, then continue dialing.
6. Dial number (up to 16 digits
long).
7. Select SAVE to store the number.
8. Repeat previous steps until all
numbers are stored, or select
EXIT.
9. Press SPEAKER to end.
Speed Dialing Options
EXIT
Preselect
Selecting Line or Intercom
SAVE BKSP EXIT
Dial Number
Dialing a Speed Number