Vertical Communications EP100 - Manual (Page 89)

CONVERSip EP100 User
Sept ‘04
Comdial 91
5. Select NEXT to display the sub-
sequent names in the index until
you reach the name you need.
6. Select DIAL to call the displayed
location.
7. If the display says NO MATCH,
select BACK to return to previ-
ous screen or enter new digits to
search for a new name.
7.9 Volume Control
7.9.1 SETTING CURRENT VOLUME LEVEL
The volume control on your telephone is a multipurpose control you
can use to set the volume (loudness) of the ringer, the speaker, the
handset, the headset, background music, and the group listening
mode.
There are four ringer loudness levels
(plus an off position). While your tele-
phone is on-hook and idle, press the
VOLUME Up or VOLUME Down
button once for each change in loudness
you desire. The ringer sounds once for
each change as an example of the
current setting.
Note: If you set the ringer to the OFF position, your telephone
sounds a short ring burst once for each call you receive at your sta-
tion while the ringer is off.
There are eight speaker loudness levels. While on a call and in
speakerphone mode, press the VOLUME Up or VOLUME Down
button once for each change in loudness that you desire.
No Match
ALL BACK RETURN
Finding No Match
Volume Up
Button
Volume Down
Button