PRG Best Boy Wash User Manual User Manual
Page 26
18
BEST BOY
®
WASH LUMINAIRE USER MANUAL
Step
3. Roll case to mounting location as required (Figure 2-8).
Step
4. Using two people, carefully lift luminaire into mounting position so that
display is facing to the side
.
Step
5. Using a third person, secure in place by tightening Truss Hook wing bolts. Ensure that luminaire is fully
supported.
Step
6. Feed safety cable through upper enclosure bracket and secure around pipe.
Step
7. Connect power and data cables according to
"Connecting Power and Data"
on page 20.
Figure 2-8: Vertical "Yoke Out" Hanging Configuration
Remove Luminaire From Case
Attach to Vertical Truss
UP
Using a third person, secure in place
by tightening Truss Hook wing bolts.
Using two people, carefully lift luminaire
into mounting position as shown.
Wing Bolt (2)
1
2
Vertical
Truss