PRG Best Boy Wash User Manual - Manual (Page 71)

BEST BOY ® WASH LUMINAIRE USER MANUAL 63
Cleaning Intake Filters
The filters should be cleaned or replaced when they become dirty. The frequency will depend on how often and in
what conditions the luminaire is used.
Parts:
10.9815.0661 2 EA HEAD, AIR FILTER, FOAM
55.9815.0052.0 2 EA O-RING, FOAM FILTER RETAINING (as needed)
Tools:
#2 Phillips screwdriver
Compressed air
and/or water
To clean or replace filters:
WARNING: Remove power from luminaire before performing any maintenance procedures.
Step 1. Remove power from luminaire.
Step 2. Remove Head Covers. (Refer to "Removing Head Covers" on page 62.)
Step 3. At each Foam Filter, remove retaining o-ring and remove filter (Figure 4-6).
Step 4. Clean filters with compressed air and/or by washing with water. Replace as necessary.
Step 5. Re-install components.
Figure 4-6: Removing Air Filters
NOTE:
If the filters do not get clean after multiple
attempts, they should be replaced.
Foam Filter
Retaining
Pull o-ring outward to loosen
Foam Filter
O-Ring