Pro Boat JR XR3i - Manual (Page 13)

13
To enter the System mode, press both the Scroll and
Channel keys at the same time while turning on the
transmitter power switch. By pressing the Scroll key, you can
now choose Model Select, Model Name Input, Frame Rate,
Auxiliary Channel 3 function, Grip button C function, Data
Reset or the Model Copy function as shown here on the
System Mode flow chart. Information for each function is
located on the page number listed next to the function name
on the flow chart.
To exit the System mode, press the Scroll and Channel keys
at the same time or simply turn off the transmitter.
Note: If you turn the transmitter off and immediately
enter System mode again, you will be returned to the
last System mode function used instead of the model
select function. While in System mode, there is no RF
output generated by the transmitter. Adjustments can be
performed with reduced battery power consumption.
If you exit System mode by pressing the Scroll and
Channel key at the same time, RF output will not be
enabled until you first turn off the transmitter.
Model Name Entry
(page 14)
21
A
ux
0
Auxiliary Channel 3
Function
(page 16)
frm
F
Frame Rate
(page 15)
md !
1
mdl
1
Model Select
(page 14)
20
clr
1
cpy
2
gbc
0
Data Reset
(page 19)
25
Grip Button C
Function
(page 17)
Copy Model Data
(page 20)
26
Accessing the System Mode
4680 JR XR3i manual 7/17/02 12:14 PM Page 13