Pro Boat JR XR3i - Manual (Page 24)

24
The End-Point Adjustment feature of the XR3i allows the
maximum travel of both the steering, throttle and Auxiliary
Channel 3 (optional) servos to be increased or decreased in
each direction to achieve the exact servo movement needed.
The End-Point Adjustment range is from 0% to 125% and is
factory set to 100% for both channels. The value displayed
on the screen depends on the current position of the steering
wheel, trigger, or trim lever to be adjusted. This feature is
very useful either to maximize servo travel or to reduce servo
over-travel to eliminate servo binding (servo moves further
than control mechanism allows), without the need for
mechanical linkage adjustment.
The screens below are accessed by turning the wheel to the
desired direction to be adjusted (left or right), by moving the
trigger to the forward or backward (brake) position, or by
moving the Grip Lever A to the forward or back positions.
L/F
st
100
E P A
L/F
aux
100
E P A
R/B
aux
100
E P A
R/B
st
100
E P A
L/F
th
100
E P A
R/B
th
100
E P A
Steering Left
End-Point Adjustment
Current Value
Values: 0 to 125
Clear = 100
Steering Right
End-Point Adjustment
Current Value
Values: 0 to 125
Clear = 100
Forward Throttle
End-Point Adjustment
Current Value
Values: 0 to 125
Clear = 100
Backward Throttle (Brake)
End-Point Adjustment
Current Value
Values: 0 to 125
Clear = 100
Left/Right Travel
Adjustment (function LN)
or Forward Travel
Adjustment
(function 2P) accessible
through Grip Button C
Functions L LN N & 2 2P P
Functions 2 2P P only
Current Value
Values: 0 to 190
Clear = 100
Rearward Travel Adjustment
(function 2P) accessible
through Grip Button C
Current Value
Values: 0 to 190
Clear = 100
Channel 3 Screens
(Optional)
End-Point Adjustment (Function Mode)
4680 JR XR3i manual 7/17/02 12:14 PM Page 24