Pro Boat JR XR3i - Manual (Page 33)

INCREASE
CLEAR
DECREASE
33
The Steering Dual-Rate adjustment, located at Grip Lever B,
allows the Dual-Rate value (maximum servo travel) to be
increased or decreased within a range from 100% through
20% of the total end point value established in the steering
EPA function. This function is very useful in race conditions
as it allows you to custom tailor the steering radius and
sensitivity for the current track conditions.
Please note that since the Dual-Rate value shown in the
"STG" screen is the percentage of the end-point value
established in the Steering EPA function, the value will
not always increase or decrease each time Grip Lever B
is moved.
If the Emergency Steering button function (page 17) is
active, pressing Grip Button C will restore the steering dual
rate to 100% until the button is released.
To adjust the Steering Dual-Rate value, move the electronic
Grip Lever B either left (-) or right (+). As soon as the trim is
moved, the “STG” Steering Dual-Rate screen will appear and
will continue to be displayed unless the Grip Lever B is
untouched for a period of two seconds. To reset the trim
value to the factory preset setting of 70%, press the Increase
and Decrease keys at the same time while the "STG" screen
is displayed.
stg
70
∞
R A T E
Current Value
(20% to 100%)
Press the Increase and Decrease keys at the same time to
reset the steering dual rate trim to the factory preset (70%).
Decrease Increase
Grip Lever B
Steering Dual
Rate Trim
Grip Lever B: Steering Dual-Rate Trim Adjustment (STG)
4680 JR XR3i manual 7/17/02 12:14 PM Page 33