RED ROCKET-X - Manual (Page 19)

COPYRIGHT © 2014 RED.COM, INC
RED ROCKET-X INSTALLATION INSTRUCTIONS
955-0033, REV-B | 19
REQUIRED TOOL

Phillips #1 screwdriver
POWER SUPPLY
Before installing the RED ROCKET-X, ensure that you have the appropriate power connector or power cable
adaptor to plug into the RED ROCKET-X 6-pin power connector. The 6-pin PCIe power cable that is included
with the RED ROCKET-X is for Mac Pro installations only, and is not compatible with a PC system.
ATTACH THE PC EXTENDER TO THE RED ROCKET-X
If your PC system has a PCIe card holder, attach the PC extender (included) to the RED ROCKET-X. When you
install the RED ROCKET-X in the PC system, the PC extender will slide into the PCIe card holder, securing the
RED ROCKET-X.
1. Use a Phillips #1 screwdriver to install the two (2) M3x0.7 x 6 mm pan head screws (included) that attach
the PC extender (included) to the end of the RED ROCKET-X.
‒ The PC extender should be flush with the front of the RED ROCKET-X.
‒ The wider end of the PC extender should be at the top of the RED ROCKET-X.
Attach PC Extender
04
INSTALL IN A PC