RED ROCKET-X - Manual (Page 24)

COPYRIGHT © 2014 RED.COM, INC
RED ROCKET-X INSTALLATION INSTRUCTIONS
955-0033, REV-B | 24
DOWNLOAD DRIVER AND FIRMWARE
To download the RED ROCKET-X driver and firmware, follow the instructions below:
1. Go to
www.red.com/downloads .
2. Download the RED ROCKET-X Installer to your computer. The drivers, firmware, and installation instructions
for the RED ROCKET-X are located inside the installation package.
3. After downloading, you will see the new compressed (zipped) folder in the location to which you down-
loaded the Installer (your system may unzip the folder automatically).
The folder name uses this format: RED_Rocket-x_Installer_vx.x.x.
4. Open the zipped folder (your system may unzipped the folder automatically).
5. Extract the folder specific to your operating system (Mac or Windows) to your desktop.
INSTALL RED ROCKET-X DRIVER
INSTALL RED ROCKET-X DRIVER (MAC OS X)
On Mac OS X, the driver must be installed before upgrading the firmware; otherwise the firmware upgrade will
fail.
To install the RED ROCKET-X driver on Mac OS X, follow the instructions below:
1. Ensure that you have already downloaded the RED ROCKET-X Installer. For more information about how to
download the RED ROCKET-X Installer, go to “Download Driver and Firmware” on page 24 .
2. Locate and open the RED_Rocket-x_Installer_vx.x.x > RED_Rocket-X_MacOSX folder.
3. Open the REDrocket-X_Driver_OSX_vx.x.x.x.pkg file.
The Install RED Rocket-X window opens.
05
INSTALL DRIVER
AND FIRMWARE