RED ROCKET-X - Manual (Page 23)

RED ROCKET-X INSTALLATION INSTRUCTIONS
COPYRIGHT © 2014 RED.COM, INC 955-0033, REV-B | 23
E. Connect the SDI Out B cable on the HD-SDI slot filler to the SDI Out B connector on the RED ROCKET-X.
The SDI Out B connector is the left connector when the RED ROCKET-X is installed.
11. Reinstall the computer casing.
12. Return the computer to the upright position.
13. Reconnect all cables to the computer system.
14. To install or upgrade the RED ROCKET-X driver and firmware, go to
“Install Driver and Firmware” on page
24 .
Connect HD-
SDI Slot Filler to
RED ROCKET-X