Casio CELVIANO AP45ES1C - Manual (Page 16)

E-14
Basic Operation
430A-E-016A
To adjust the volume of the main tone
1
Hold down the SETTING button, and keep it
depressed until you reach step 4 of this procedure.
2
Press the GRAND PIANO 1 button.
• This causes the indicator lamp above the button to
flash.
3
Use one of the procedures below to set the main
tone volume to a value in the range of 40 to 127.
• To scroll the volume setting value: While holding
down the SETTING button, use the + (increase) and –
(decrease) keys to scroll the volume setting value.
Holding down either key changes the setting at high
speed.
Pressing + and – at the same time automatically selects
a volume setting value of 127.
• To input the volume setting value: While holding
down the SETTING button, use the number input
keys to input a two-digit or three-digit volume setting
value in the range of 40 to 127. You can input a two
digit or a three-digit value. The level you input is
applied to the volume setting value when you release
the SETTING button. The volume setting does not
change if you input a one-digit value or a value that
is outside of the allowable range.
• A note does not sound when you press a keyboard
key at this time.
4
Release the SETTING button to complete the
procedure.
NOTE
• The setting you make for the main tone volume remains
in effect even if you change to another tone.
+/–
keys
Number Input keys
C 3 B 2
To adjust the volume of the layer tone
1
Hold down the SETTING button, and keep it
depressed until you reach step 4 of this procedure.
2
Press the GRAND PIANO 2 button.
• This causes the indicator lamp above the button to
flash.
3
Use one of the procedures below to set the layer
tone volume to a value in the range of 40 to 127.
• To scroll the volume setting value: While holding
down the SETTING button, use the + (increase) and –
(decrease) keys to scroll the volume setting value.
Holding down either key changes the setting at high
speed.
Pressing + and – at the same time automatically selects
a volume setting value of 72.
• To input the volume setting value: While holding
down the SETTING button, use the number input
keys to input a two-digit or three-digit volume setting
value in the range of 40 to 127. You can input a two
digit or a three-digit value. The level you input is
applied to the volume setting value when you release
the SETTING button. The volume setting does not
change if you input a one-digit value or a value that
is outside of the allowable range.
• A note does not sound when you press a keyboard
key at this time.
4
Release the SETTING button to complete the
procedure.
NOTE
• The setting you make for the layer tone volume remains
in effect even if you change to another tone.
+/–
keys
Number Input keys
C 3 B 2