Casio CELVIANO AP45ES1C - Manual (Page 40)

E-38
Assembly Instructions
430A-E-040A
4 Connecting to a Power Supply
1. Check to make sure that the digital piano’s POWER button
is in the OFF position. If it is ON, press the button to switch
it OFF.
2. Attach the power cord that comes with the digital piano to
the bottom of the digital piano.*
3. Plug the digital piano’s power cord into a wall outlet (Figure
9).
* applies to the AP-45V.
Important!
• The shapes of the digital piano’s power cord and wall
outlet should be different according to countries or
regions. The illustrations are examples.
• With the AP-45, the power cord is hard-wired to the
bottom of the instrument.
Attachment of the Score Stand
Install the music stand by inserting its pegs into the holes in
the top of the piano.
Figure 9
Power cord
Household
wall outlet
3 Connecting the Pedal
Position the pedal plug as shown in Figure 8 and insert it
into the pedal connector on the bottom of the digital piano.
Secure the pedal cable to the upright of the stand using the
clips (Figure 8).
Figure 8
Clip
Pedal plug
CAUTION
• The screws that you use to assemble the stand may
become loose after a long period due to changes in
temperature and humidity, or vibration caused by normal
use, etc. Periodically check the screws used to fasten
the stand and the butterfly bolts used to fasten the stand
and the digital piano, and tighten them whenever
necessary.
Power Outlet
• To power the digital piano, use a power outlet that allows
easy access when plugging in or unplugging the power
cord.