Casio CELVIANO AP45ES1C - Manual (Page 18)

E-16
430A-E-018A
Basic Operation
To adjust the volume of the split tone
1
Hold down the SETTING button, and keep it
depressed until you reach step 4 of this procedure.
2
Press the ELEC PIANO 1 button.
• This causes the indicator lamp above the button to
flash.
3
Use one of the procedures below to set the split
tone volume to a value in the range of 40 to 127.
• To scroll the volume setting value: While holding
down the SETTING button, use the + (increase) and –
(decrease) keys to scroll the volume setting value.
Holding down either key changes the setting at high
speed.
Pressing + and – at the same time automatically selects
a volume setting value of 127.
• To input the volume setting value: While holding
down the SETTING button, use the number input
keys to input a two-digit or three-digit volume setting
value in the range of 40 to 127. You can input a two
digit or a three-digit value. The level you input is
applied to the volume setting value when you release
the SETTING button. The volume setting does not
change if you input a one-digit value or a value that
is outside of the allowable range.
• A note does not sound when you press a keyboard
key at this time.
4
Release the SETTING button to complete the
procedure.
NOTE
• The setting you make for the split tone volume remains
in effect even if you change to another tone.
+/–
keys
Number Input keys
C 3 B 2
More about tones
Polyphony
This digital piano can play up to 64 notes at the same time.
Note, however, that the tones listed below are capable of only
32-note polyphony. GRAND PIANO 1, BRIGHT PIANO,
HONKY-TONK, ELEC PIANO 1, HARPSICHORD, STRINGS
1, CHOIR, SYNTH-PAD, RIDE ACO BASS
Touch Response
The touch response feature causes changes in the volume and
the sound of the tone in accordance with how much pressure
you apply to the keyboard, just like an acoustic piano.
Touch response affects the HARPSICHORD tone only slightly,
because the original musical instrument normally produces
the same sound, no matter how much pressure is applied.
Digitally Sampled Tones
The tones of this digital piano are produced using digitally
recorded samples of actual musical instruments. Not all of
the instruments, however, can produce tones across the entire
range played by this digital piano (A
0 through C 8 ). In such a
case, digital recordings are used for the range that actually
can be produced by the original instrument, and synthesized
tones are used for notes that cannot be produced naturally.
Because of this, you may notice very slight differences
between natural notes and synthesized notes in sound quality
and in results produced when using effects. These differences
are normal and do not indicate malfunction.
Adjusting the Brilliance of a Tone
You can use the BRILLIANCE slider to adjust the clarity and
sharpness of a tone to suit your music and personal
preferences.
1
Slide the BRILLIANCE slider left and right to adjust
the brilliance of a tone to the level that you want.
• Moving the slider towards MELLOW produces a more
mellow sound, while moving it toward BRIGHT
produces a brighter sound.