Installer must complete the following – Reznor MAPS II Unit Installation Manual User Manual
Page 64
Form I-MAPS II, Page 64
www.RezSpec.com
(800) 695-1901
©2008 Thomas & Betts, All rights reserved.
Trademark Note: Reznor
®
and MAPS
®
are registered in the United States.
10/08 Form I-MAPS II (Version B.6)
Installer:
Name
________________________________________________________
Company ________________________________________________________
Address
________________________________________________________
________________________________________________________
________________________________________________________
Phone
_________________________________
Distributor (company from which the unit was purchased):
Contact
________________________________________________________
Company ________________________________________________________
Address
________________________________________________________
________________________________________________________
________________________________________________________
Phone
_________________________________
Model No. ______________ Serial No._____________________Date of Installation ____________
SPECIFIC INSTALLATION NOTES: (i.e. Location, CFM, HP, Static Pressure, Amps, Temperature,
Voltage, Adjustments, Options, Warranty, etc.)
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
BUILDING OWNER OR MAINTENANCE PERSONNEL:
For service or repair
•
Contact the installer listed above.
•
If you need additional assistance, contact the Reznor Distributor listed above.
•
For more information, contact your Reznor Representative by calling 1-800-695-1901.
Reznor/Thomas & Betts Corp.
150 McKinley Avenue
Mercer, PA 16137
INSTALLER MUST COMPLETE THE FOLLOWING: