CPG PageMaster 402N - Manual (Page 135)

Apr 02
Compuprint PageMaster 402N User Guide 6-5
Testing the Duplexer
Testing the Duplexer
After installing the duplexer, use the following procedure to make sure it transports paper correctly:
1. Turn the printer on by pressing the [ I ] on the power switch on the right side of the printer.
2. Once the printer has warmed up and displays the “Ready” message on the control panel dis-
play, use any software application to print a few duplexed sheets.
3. If the duplexer does not transport paper or if the control panel shows an error message, refer
to
“Solving Duplexer Problems” on page 6-6 .
7
8