CPG PageMaster 402N - Manual (Page 51)

Apr 02
Compuprint PageMaster 402N User Guide 3-9
Interface Menu
Interface Menu
The Interface Menu provides access to the printer interface settings. Use the following procedure to
enter the interface menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “Interface Menu” is shown on the second line of the
display.
3. Press the SELECT button to enter the interface menu.
4. Press the NEXT button to move through the submenus: Port Name.
5. Use the procedures in the following table to access and change the printer interface settings:
PS Menu
The PS Menu provides access to the PostScript settings. Use the following procedure to enter the
PS Menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “PS Menu” is shown on the second line of the display.
3. Press the SELECT button to enter the PS menu.
4. Press the NEXT button to move through the submenus: Print PS Errors, and Manual Feed
TO.
5. Press the SELECT button to enter a submenu.
6. Use the procedures in the following table to access and change the PostScript settings:
Submenus Default
Setting Available
Settings Procedure for Changing Setting
Port
This submenu allows you
to choose the type of
interface. (Port Name):
On (Port Name):
On, Off 1. Press NEXT or PREVIOUS to toggle between
available ports.
2. Press SELECT to save this setting.
Parallel Setup
This submenu allows you
to set up the parallel
interface. Interpreter:
Auto Switch
Format:
Raw
Mode:
Bidirectional
Interpreter:
Auto Switch
PCL
PostScript 3
Format:
Raw
Normal
Binary
Mode:
Bidirectional
Standard
1. Press NEXT or PREVIOUS to scroll through the
INTERPRETER, FORMAT, and MODE
submenus.
2. Press SELECT to choose a submenu.
3. Press NEXT or PREVIOUS to scroll through the
settings.
4. Press SELECT to choose and save a setting.