Storing the printer for long periods of time, Storing the printer for long periods of time 4-27 – CPG PageMaster 402N User Manual

Page 87

Advertising
background image

Apr 02

Compuprint PageMaster 402N User Guide

4-27

Storing the Printer for Long Periods of Time

5.

Wait 30 minutes for the printer to cool.

6.

Remove all installed paper-handling options. Refer to Chapters 6 through 9 for instructions
for removing installed paper-handling options.

7.

Remove the toner cartridge and place it in an opaque plastic bag, then seal the bag with tape
and place it in a sturdy box.

8.

Repack the printer, paper trays, AC power cord and toner cartridge into the original shipping
box or boxes.

9.

Once the printer is in the new location, refer to the Installation Guide included in the origi-
nal printer packaging and in the Electronic Library CD-ROM for installation instructions.

Storing the Printer for Long Periods of Time

If you will not be using the printer for several months, use the following procedure to prepare the
printer for storage:

1.

Turn the printer off by pressing the [ O ] on the power switch on the right side of the printer.

2.

Unplug the AC power cord from the AC wall outlet.

3.

Disconnect the printer from the host computer.

4.

Remove the paper from all of the paper trays.

5.

If you will be storing the printer for six months or longer, remove the toner cartridge and
place it in an opaque plastic bag, and seal the bag with tape.

NOTE:

After prolonged inactivity the toner cartridge may degrade to the point where it is no longer usable
and must be replaced. Poor print quality and frequent paper jams may indicate that the toner has
solidified and that the drum has oxidized during storage.

6.

Cover the printer with a plastic sheet and tape down the corners.

7.

Store the printer in an area where the temperature and humidity are moderate, as described in
“Environment Requirements” on page 1-4.

NOTE:

Do not stack other items on top of the printer when storing the printer.

◆ ◆ ◆

Advertising