Connecting your antenna / cable to tv – Sceptre X42BV-FULLHD User Manual
Page 27
SCEPTRE X42 HDTV User Manual
- 27 -
www.SCEPTRE.com
Connecting Your Antenna / Cable
to TV
If You Have Digital Cable without Cable Box or
Antenna…
1. Make sure the power of X42 LCD HDTV is turned off.
2. Connect the Coaxial RF cable from your antenna or digital cable to the
ATSC/NTSC port off the back of your X42 LCD HDTV.
3. Turn on X42 LCD HDTV.
4. Select TV (Air) for antenna or TV (Cable) for digital cable from either your
remote control’s source button or source button on the right side of the TV.
5.
Use the On Screen Display to scan for channels.
Please Note :
•
Not all broadcasts are in High Definition (HD). Please refer to your local
broadcasting stations for more information.
•
The X42 LCD HDTV’s tuner is designed for HDTV therefore requires a stronger
signal than normal TVs. If you cannot achieve that signal level with your antenna
or cable, your X42 LCD HDTV might lose picture or sound.
•
This TV will turn off automatically if there’s no signal present for more than 15
minutes.