Sceptre X42BV-FULLHD - Manual (Page 33)

SCEPTRE X42 HDTV User Manual
- 33 -
www.SCEPTRE.com
If You Want the Fair Connection with Composite…
1. Make sure the power of X42 LCD HDTV and your DVD player is turned
off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your DVD player and AV 1’s Yellow Video connector port off the
back of your X42 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both
your DVD player and AV 1’s white connector port off the back of your
X42 LCD HDTV.
4. Connect the red color connector to both your DVD player and AV 1’s red
connector port off the back of your X42 LCD HDTV.
5. Turn on the X42 LCD HDTV and your DVD player.
6. Use the remote control’s source button or the source button on the right
side of the TV to switch to AV 1 (CVBS).
Please Note :
• If AV 1 is already occupied, please use AV 2 as your connection port
and switch source to AV 2 (CVBS).
• AV 2 is located on the left side of the TV, while facing the front of the TV.
• Please reference the DVD player’s manual as well, to make sure the
DVD player is configured to output correctly to the TV.
• This TV will turn off automatically if there’s no signal present for more
than 15 minutes.