Connecting game consoles to the tv, For your playstation®3 – Sceptre X42BV-FULLHD User Manual
Page 41
SCEPTRE X42 HDTV User Manual
- 41 -
www.SCEPTRE.com
Connecting Game Consoles to
the TV
For your Playstation®3…
1. Make sure the power of X42 LCD HDTV and your Playstation 3 is turned off.
2. Connect a HDMI cable to the HDMI output of your Playstation 3 and the other
end to the HDMI port off the back of your X42 LCD HDTV.
3. Turn on the X42 LCD HDTV and Playstation 3.
4.
Use the remote control’s source button or the source button on the right side of
the TV to switch to HDMI 1.
Please Note :
•
Please reference the Playstation 3’s manual, to make sure the PS3 is
configured to output correctly to the TV. PS3 by default outputs to
composite only. With newer firmwares PS3’s HDMI should also output
a signal. Please call up PS3’s tech support for further troubleshooting.
•
This TV does not decode Bitstream digital audio, therefore you’ll need to
make sure your DVD is setup for PCM digital audio through HDMI.
•
If HDMI 1 is already occupied, please use HDMI 2 as your connection
port and switch source to HDMI 2.
•
This TV will turn off automatically if there’s no signal present for more
than 15 minutes.