SIG SAUER P229 - Manual (Page 26)

www.sigsauer.com 26
5.2 Firing the Pistol
1. Aim the pistol at a safe target
2. Place finger on the trigger and pull back to discharge.
3. Keep pistol aimed at the target and continue to fire as required or until the
pistol is empty.
5. Remove the magazine, unload and clear the pistol (see section 6.0 “Unload-
ing the Pistol”). If the pistol is fired until the magazine is empty, the slide will
remain locked to the rear. If firing is to continue, reload the pistol (see section 4.4
“Reloading During Shooting”).
Step 2
13SIG781_Classicmini_manual_8501154REV01.indd 26 6/19/13 1:08 PM