2 magazine disassembly, Warning – SIG SAUER P229 User Manual
Page 37
Advertising
www.sigsauer.com
37
8.2 Magazine Disassembly
1. Locate the bottom of the magazine floorplate.
2. Using a punch, cleaning rod, or similar tool, depress the magazine insert and
push the magazine floorplate forward until it is clear of the magazine tube.
WARNING
The magazine spring is compressed. Guard the magazine insert and magazine
spring with your thumb to control the release of magazine spring tension. Uncon-
trolled release can cause injury. Wear eye protection.
3. Remove the magazine follower and magazine spring from the magazine tube.
This level of disassembly is sufficient to allow a thorough cleaning after shooting.
Step 1
Step 2
Step 3
Step 1 P224
13SIG781_Classicmini_manual_8501154REV01.indd 37
6/19/13 1:08 PM
Advertising