SIG SAUER P229 - Manual (Page 43)

www.sigsauer.com 43
1. Ensure the magazine is removed and the pistol is unloaded (see section 6.0
“Unloading the Pistol”).
2. Check recoil spring function/slide travel.
a. Retract the slide fully and release.
b. Verify the slide locks fully in the closed position.
c. Repeat the procedure.
3. Check the trigger mechanism:
a. Pull the trigger fully to the rear.
b. As the trigger is pulled rearward, verify the hammer cocks. At the end of
trigger travel, the hammer should fall forward firmly.
Step 2a
Step 3a - 3b
13SIG781_Classicmini_manual_8501154REV01.indd 43 6/19/13 1:08 PM