SIG SAUER P229 - Manual (Page 44)

www.sigsauer.com 44
4. Check slide catch lever.
a. Insert an empty magazine.
b. Retract the slide fully and release.
c. Verify the slide is locked to the rear by the slide catch lever.
d. Depress the slide catch lever.
e. Verify the slide is released and closes in the locked position.
f. Remove the magazine.
5. Inspect the magazine.
a. Check the condition of the magazine tube.
b. Verify the magazine floorplate is secure.
c. Check for free movement of the magazine follower and spring.
d. Insert the magazine into the pistol and remove. Verify smooth insertion.
Check the magazine catch for clean engagement and smooth release.
Step 4a, 4b & 4c Step 4d & 4e
Step 4f Step 5d
13SIG781_Classicmini_manual_8501154REV01.indd 44 6/19/13 1:08 PM