SIG SAUER P320 - Manual (Page 45)

www.sigsauer.com 45
9.2 magazine catch Removal and Reversal
1. depress the magazine catch until the back protrudes slightly from the opposite
side and hold.
2. on the protruding side, press the straightened end of a paper clip into the hole
on the back side of the magazine catch to release the magazine catch stop.
3. remove the magazine catch stop.
4. remove the magazine catch and magazine catch spring, keeping the two
pieces together.
5. insert the magazine catch and magazine catch spring on the desired side of the
pistol body.
6. insert the magazine catch stop from the opposite side until the magazine catch
stop latch engages.
Step 2
Steps 3 & 4
Steps 5 & 6