SIG SAUER P320 - Manual (Page 51)

www.sigsauer.com 51
waRning – sight adJustment
Sight corrections should only be
performed on an unloaded firearm.
Manipulating the sights on a loaded
firearm could result in unintentional
discharge, causing injury or death.
Visually and physically confirm the
pistol is unloaded before making sight
adjustments.
do not adJust the sights on
a loaded fiReaRm
10.3 elevation (up/down) adjustment
There are different height combinations available for the front and rear sights.
The sights are numbered according to their height. you can change elevation by
changing either the rear or front sight. it’s easier if you change the rear sight
first. There are six rear sight heights available. each rear sight change will move
the impact of the bullet approximately 2” at 25 yards. There are five front sight
heights available. each front sight change will move the impact of the bullet ap-
proximately 1” at 25 yards.
When changing sights, remember this rule: nuMBerS uP, grouPS uP; nuMBerS
doWn, grouPS doWn. This is true for both front & rear sights.