SilentKnight 5700 - Manual (Page 15)

151295
2-1
Section 2
Agency Listings, Approvals, and Requirements
Install and maintain in accordance with NFPA 72. Detector spacing shall be in accordance to NFPA 72. End-of -
line relays and resistors shall be placed within the electrical box located and the end of the initiating circuit.
Testing and maintenance should be performed according to NFPA 72.
2.1 Federal Communications Commission (FCC)
The following information must be provided to the telephone company before the 5700 can be connected to the
phone lines:
1. This device may not be directly connected to coin telephone or party line services.
2. This device cannot be adjusted or repaired in the field. In case of trouble with the device, notify the installing
company or return to:
Silent Knight
12 Clintonville Road
Northford, CT 06472-1610
(203) 484-7161
3. If the 5700 causes harm to the telephone network, the telephone company will notify the user in advance that
temporary discontinuance of service may be required. If advance notice is not practical, the telephone com-
pany will notify the user as soon as possible. Users have the right to file complaints, if necessary, with the
Federal Communications Commission.
4. The telephone company may make changes in its facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens, the telephone company will provide advance notice to
allow you to make the necessary modifications to maintain uninterrupted service.
a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
wiring diagram of this equipment is a label that contains, among other information, a product identifier in
the format US: AC6AL05B-205700. If requested, this number must be provided to the telephone company.
b) See Section 4.10 for phone jack information.
c) A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord
and modular plug is provided with this product. It is designed to be connected to a compatible modular jack
A Manufacturer: Silent Knight by Honeywell
B Model Number: 5700
C FCC registration number: US: AC6AL05B205700
Ringer equivalence: 0.5B
D Type of jack: RJ31X
E Facility Interface Codes: Loop Start: 02LS2
F Service Order Code: 9.0F
Warning
This device has been verified to comply with FCC Rules Part 15. Operation is subject to the following conditions: (1)
This device may not cause radio interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.