Crestron electronic ST-1700C - Manual (Page 19)

Crestron ST-1700C 1-Way Wireless RF Touchpanel
“Touch Panel Transfer” Window
4. Click Browse. The “Open” window appears as shown below.
5. Select the VT Pro-e (vtz) file and click Open. The transfer will complete
automatically.
Select VTZ File
6. Disconnect the programming cable and the external power pack from the
touchpanel.
7. Close the Viewport, exit VT Pro-e, and disconnect the programming
cable from the PC and the control system.
Firmware Upgrade
A firmware upgrade file has the
extension .csf.
Firmware upgrade files are obtained from the Downloads | Software Update |
Touchpanels section of Crestron’s website (
www.crestron.com) . To upgrade the ST-
1700C firmware, complete the following steps.
1. Make sure that “Hookup and Preparation” that begins on page 11 has been
performed.
2. As shown on the next page, select File Transfer | Update Touchpanel
Firmware from the Viewport menu.
Operations Guide – DOC. 6050 1-Way Wireless RF Touchpanel: ST-1700C • 15