Crestron electronic ST-1700C - Manual (Page 7)

Crestron ST-1700C 1-Way Wireless RF Touchpanel
5. Requires Crestron CNRFGWA 1-Way RF Receiver, or ST-CP SmarTouch Control Processor.
6. Extension requires a prefix specific to the touchpanel type. In DETAILS, projectname represents the
assigned project name, and vx.xxx.x represents a version number.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers only. New users may be required to register to obtain access to certain areas of
the site (including the FTP site).
Physical Description
The touchpanel has a 5.7-inch (14.48 cm) active matrix color display panel with 320 x
240 resolution and 16-bit non-palette graphics. The electronic hardware is housed in a
high impact, black molded plastic enclosure, shown below. Connectors to power the
unit and upload touchscreen projects are located on the sides of the unit.
Operations Guide – DOC. 6050 1-Way Wireless RF Touchpanel: ST-1700C • 3