SmarTek Systems TMS-2 - Manual (Page 14)

Edit Temperature Probe Parameters
S
S
SmarTek Systems
410-315-9727
[email protected]
www.smarteksys.com
R
R
To Open The Probe Parameter Edit Window,
Right Click on Probe Description Field.
Click in Upper/Lower Field
to Increment/Decrement
Click in Upper/Lower Field
to Increment/Decrement
Enter/Modify Descriptive Text for the Probe
NOTE: Probe Serial Numbers must match the electronic serial numbers
in the digital temperature probes. Probe Serial Numbers should
not be modified unless replacing a failed probe or adding probes.