SmarTek Systems TMS-2 - Manual (Page 8)

TMS-2 Start Window - Connectivity
S
S
SmarTek Systems
410-315-9727
[email protected]
www.smarteksys.com
R
R
After starting the TMS-2 Monitor and Setup Program, this window appears. The user must click
one of the buttons to specify the connectivity between the PC where TMS-2 Monitor is running and the USI.
Network – Connectivity using TCP/IP sockets between the PC and a serial device server connected to the USI Sys Port.
Modem – Connectivity using dial up modems connected to the PC and the USI Sys Port.
Direct – Connectivity using an RS-232 serial cable (PC to USI Sys) between the PC comm port and the USI Sys Port.
Exit – Terminates the TMS-2 Monitor Program.