SmarTek Systems TMS-2 - Manual (Page 7)

TMS-2 USI Front Panel Indications
1 3 5 7
Aux
RS-232
9
2 4 6 8 10
Universal Sensor Interface-Front
Sys Reset
S
S
SmarTek Systems
410-315-9727
[email protected]
www.smarteksys.com
R
R
1) On Power Up or Reset, LEDs Light in Sequence:
LEDs 5, 6 On, Then 7, 8 and 3, 4 On, Then 9, 10 and 1, 2 On
LEDs 5, 6 Off, Then 7, 8 and 3, 4 Off, Then 9, 10 and 1, 2 Off
2) While Operating Assigned LEDs Light in Sequence (approx 1 second per LED)
Every Update Period (Faster sequencing indicates a temperature probe problem)
3) While in Alarm Condition Assigned LEDs Double Flash:
Assigned LEDs are On Solid Once Acknowledged (TMS-2 Monitor Program)
Assigned LEDs are Off When Not in Alarm Condition